Best Plasma Cutter 2021-Reviews And Buyers Guide

The plasma cutter’s primary purpose is to cut metal accurately, and its most expensive task in metal fabrication and picking the best plasma cutter with an available budget can be challenging tasks.

On the other hand, advanced inverter technologies help reduce your cost, and a plasma torch is used to get accurate cuts.

In addition to this, some best plasma cutters also available in portable, and also there is a built-in compressor, so you don’t need to carry both the machines separately.

To make you fully aware of the best plasma cutter, our team has picked some machines and reviewed them sincerely by their pros, cons, and features.

 

Top 10 Best Plasma cutter 2021

 

1-Hypertherm 088079 Powermax30 XP

 

 

best plasma cutter

           

             Key Features

  • The manufacturing company of the cutter is Hypertherm
  • The weight of the cutter is 22 pounds
  • The Cutter model number is 088079.

Top class plasma cutter with weight only 22 pounds and portable to easily transport the cutter from one project to the other.

Hypertherm 088079 Powermax30 XP with an adapter that can work on available outlets and cutter also makes adjustments according to the adapter.

On the other hand, a comfortable torch is used in the machine, saving your hands from any damage and bearing high temperatures. Also, the handles used to keep the torch is very pleased.

This plasma cutter’s only downfall is that it can only be used for light and small projects, so not recommended for heavy jobs.

 Many of the necessary accessories are included with the package, which helps you complete the job without warring anything.

Metal case body and shoulder strap make the plasma cutter to carry from one place to another, and the cutting capability of the machine is excellent.

In addition to this, the plasma cutter is two in one, which can be used at high power for thick metal cutting on the other hand to cut thin metal sufficient cut consumables used.

Cutter information and features
  • The manufacturing company of the cutter is Hypertherm
  • The weight of the cutter is 22 pounds
  • Cutter model number is 088079
  • Product dimensions are 14 x 5.5 x 11.5 inches
  • The installation method is plasma cutting
  • Plugged into 120/240v power outlet
  • Auto voltage technology used
  • Duty cycle 20 percent and 35 percent at different voltages
Pros
  • Three year of long warrant
  • Different metalworking capabilities
  • Portable and lightweight so easy to transport
  • Torch with cutter is comfortable and save from any damage
Cons
  • Light duty plasma cutter so cannot be used at the heavy projects.

2-Lotos LTP5000D 50Amp

 

 

plasma cutter

           

             Key Features

  • The manufacturing company of the welder is LOTOS
  • Installation type of the cutter is plasma cutting
  • The weight of the cutter is 22.5 pounds.

One of the best plasma cutters with affordable prices and dual voltage capacity can be used on lots of metals like copper, steel, aluminum, mild steel, etc.

In addition to this, the plasma cutter performance is very reliable and very easy to use and set up the machine for beginners.

As the cutter can work on many metals, try to avoid painted and rusted metals where it cannot function properly because on pilot Arc has been used.

On the other hand, the cutter is compact, and a useful handle to transport the machine to other places and uses nonhazardous air to cut different metals.

Everything from the company comes ready to use. You can set up the machine in 10 minutes, and the cutting capabilities of the device are 1/2 inches at the minimum voltage and 3/4 at maximum voltages.

Moreover, the cutter’s performance is excellent, and to cool down the machine during work, advanced technology of PAPST is used and make sure that the performance of the device is stable and durable.

This cutter includes an air compressor, so there is no need to spend extra money on this, and it is more accurate and cost-effective than oxyhydrogen cutting.

MOSFET transistors advanced technology used to provide high power output for cutting thick metal and to cut thin metal it offers steady work.

If you want to do DC welding, thanks to PWM technology, perfect DC and the cutter is suitable for DIY and small and light projects.

Cutter information and features
  • The manufacturing company of the welder is LOTOS
  • Installation type of the cutter is plasma cutting
  • The weight of the cutter is 22.5 pounds
  • Working capabilities on AC/DC both power
  • Input Voltages capacity 110-220V, 1-PH, 50/60 Hz
  • Duty cycle 60 percent
  • 10 x 13 x 26 inches are the dimensions of the cutter
  • Cutter model number is CP-81S5-QR0Q
Pros
  • Cutting capabilities on lots of metals
  • Necessary tools included
  • Compact and lightweight
  • Portable and easy to carry
  • Many safety features and easy to use
  • One year warranty
Cons
  • Not good for heavy and industrial jobs

3-Hobart 500566 Airforce 40i Plasma Cutter 240V

 

 

           

             Key Features

  • Hobart is the manufacturing company of the cutter
  • 3 pounds is the weight of the machine
  • Cutter dimensions are 17 x 18.25 x 11.63 inches.

Hobart 500566 Air force 40i Plasma Cutter 240V is a perfect and concrete plasma cutter with fast cutting speed and required duty cycle, but the cutter’s price is a little more.

Hobart brand is making excellent plasma cutters for many years with the same price as other brands but perfect in features and performance.

In addition to this, you will get performance for what you pay and can be used for light and small jobs, so not recommended for industrial projects.

On the other hand, retire technology is used to clean cut on metals, even on painted and rusted metals.

Also, wind tunnel technology is used to make the cutter’s internal components safe while doing cutting work.

The cutter’s downfall is that the leads come with the machine are smaller and works on 220/240 volts input, so required a standard household outlet to plug the adapter.

By talking about the safety features, a fan uses it, which starts automatically on demand and decreases dust and debris in the cutter.

Ergonomic trigger safety feature used and plasma cutter torch and a clean cutting capacity of the machine is 5/8 inches.

Also, the cutter is not so heavy, so it can easily be transported, and the setup of the machine is straightforward and set up the single amperage knob used.

 

Moreover, if we talk about the machine’s cutting capacity, then perfect for cutting 7/8 inches of metal by utilizing a 50 percent duty cycle.

Also, to get the machine’s full performance, you need a 50 amps breaker, but it is highly recommended for hobbyists or any workshop cutting heavier gauged metal.

Features and cutter information
  • Hobart is the manufacturing company of the cutter
  • 3 pounds is the weight of the machine
  • Cutter dimensions are 17 x 18.25 x 11.63 inches
  • The model number of the cutter is 500566
  • Three years of long warranty
  • 50 percent duty cycle
Pros
  • Good price range
  • Different safety features and technologies used
  • Pilot Arc feature for a more clean-cut
  • Portable so easy to carry
  • Cutting capacity is powerful
Cons
  • 50 amp breaker required
  • Ground clamp is not so good

4-Forney Easy Weld 251 20 P Plasma Cutter

 

 

top rated cutter

           

             Key Features

  • The manufacturing company of the cutter is Forney Industries
  • The weight of the cutter is 21 pounds
  • Cutter dimensions are 15.13 x 8.13 x 12 inches.

Forney Easy Weld 251 20 P Plasma Cutter is the best choice for hobbyists, available at an affordable price and perfect for cutting thin metal of 1/4 inches.

In addition to this, the machine’s cutting capabilities are the same as expensive cutting machines and use longer lead.

On the other hand, the cutter is not easy for beginners and comes with two years of extended warranty.

To make the cutter easy for the user built-in troubleshooting guide is available, and using different lights, you can determine the problem the machine is facing.

Different lights tell you about other problems: rest the machine for some time or tight some components before processing the work etc.

Drag torch advanced technology used which makes sure to keep cutting along the path that you are following.

The cutter can be used in many metals like Mild steel, aluminum, and stainless steel, and less weight can be transported.

Different cutting capabilities of the cutter are as following

  • Steel – 1/4″
  • Stainless Steel – 1/4″
  • Aluminum – 3/16″
  • Galvanized Steel – 1/4″
  • Brass – 1/4″
  • Copper – 1/4″

 

Cutter information and features
  • The manufacturing company of the cutter is Forney Industries
  • The weight of the cutter is 21 pounds
  • Cutter dimensions are 15.13 x 8.13 x 12 inches
  • 251 is the model number
  • Available in green color
  • The main power source is AC current
  • One year of cutter warranty
Pros
  • Different metals working capacity
  • Lightweight and portable
  • Built-in troubleshooting technology
  • Low and affordable price range
  • Drag cutting feature
Cons
  • Maximum cutting capacity ¼ inches

5-Plasma Cutter, Spectrum 625, 90PSI, 12ft

 

 

           

             Key Features

  • The manufacturing company of the cutter is Miller Electric
  • Installation type is plasma cutting
  • The Cutter model number is 907579.

Miller’s best product in its class and impressive performance, but the cutter’s price is very high, making the most of the user, not the priority cutter.

In addition to this, the cutter can be used for personal and industrial use, but due to the price, we will recommend the machine for industrial use only.

On the other hand, the cutter is very light and compact, easy to carry to any site you want, and auto re fire technology is used to adjust the pilot Arc for cutting different metals without changing the settings.

To make the cutter easier and increase the machine’s speed and performance, there is a feature of automatically changing air pressure.

The downfall of the cutter is that the lead used in the cutter is small, but overall the cutter is perfect and highly recommended.

Cutter information and features
  • The manufacturing company of the cutter is Miller Electric
  • Installation type is plasma cutting
  • Cutter model number is 907579
  • Dimensions of the cutter are 13.25 x 5.5 x 9 inches
  • The weight of the cutter is 0.16 Ounces
Pros
  • Three years of warranty
  • Easy to use
  • Different technologies
  • Dual voltage
  • 20 percent duty cycle
Cons
  • The price of the machine is more
  • Lead is small

6-CANAWELD Plasma Cut 45 D Inverter Plasma Cutter

 

 

plasma cutter 2020

           

             Key Features

  • 45 amps of output power
  • 100 percent duty cycle
  • Dual input voltage capacity.

The quality of can weld plasma is not as good as Miller and Lincoln, but the cutter is spreading in the USA market rapidly and trying to compete with the other brands.

In addition to this, the cutter’s working capacity is 45 amps, and the cutting capacity is 5/8 inches on a plate of mild steel.

On the other hand, the unit is highly portable and includes a shoulder strap included with the components, making the cutter easy to transport.

Moreover, three years of warranty and perfect quality TRAFIMET torch with the machine make it more favorites and perfect.

Most importantly, the cutter is very powerful, which gives you a 100 percent duty cycle by using 30 amps to cut a mild steel plate of 3/8 inches.

Pilot Arc is used to make your cuts more accurate and can also be used on rusted and painted metal and uses an internal pressure switch to maintain the high and low pressure according to the cutter parameter.

The technology is used to shout down the plasma cutter when the air pressure is low and when air pressure is disconnected.

Also, no need to spend more time cleaning as a built-in pressure regulator is used in this best plasma cutter.

Necessary tools like a ground clamp, welding hose, cutting torch, consumable kit, and cutter bag are included.

Cutter information and features
  • 45 amps of output power
  • 100 percent duty cycle
  • Dual input voltage capacity
  • CANAWELD is the manufacturing company
  • The weight of the plasma cutter is 42.5 pounds\
Pros
  • Three years of warranty
  • Auto Arc re-strike system
  • Auto air pressure setting option
  • Need little time for cleaning
Cons
  • Single input voltage capacity

7-Hypertherm Powermax45 XP Hand System

 

 

           

             Key Features

  • Hypertherm is the manufacturing company of the cutter
  • 36 pounds is the weight of the cutter
  • Cutter dimensions are 17.4 x 6.8 x 14.1 inches.

If you want to spend extra money on a plasma cutter, pick Hypertherm Powermax45 XP without worrying anything.

In addition to this, the machine’s size is small, and the weight is significantly less, so you can carry the cutter where needed.

Moreover, to make the cutter easier to use for beginners and starter drag-cutting technology is used, which makes the machine simple to use.

On the other hand, smart sensor technology ensures that the air pressure is accurate; otherwise, shut down the cutter. Also, if the air pressure is disconnected, it will again turn off the cutter.

Also, Hypertherm Powermax45 XP Hand System’s cutting capabilities are superior, accurate, and faster than ox fuel.

The machine’s cutting capacity is ½ inches steel at 20 inches per minute without worrying about the cooling of the cutter.

The torch used is perfect for different projects and includes other features like pilot Arc, non-consumable pilot Arc, and gouging for punching holes.

We will highly recommend this cutter to the starter as well as a professional welder and cutter.

Cutter information and features
  • Hypertherm is the manufacturing company of the cutter
  • 36 pounds is the weight of the cutter
  • Cutter dimensions are 17.4 x 6.8 x 14.1 inches
Pros
  • Perfect and durable
  • Can be used for heavy and industrial jobs
  • Small in size and portable
  • Different adjustable settings
Cons
  • Price of the cutter is little more.

8-Plasma Cutter, 10-40A, Inverter, 70 PSI

 

 

           

             Key Features

  • Lincoln Electric is the manufacturing company of the cutter
  • The weight of the cutter is 41 pounds
  • Cutter dimensions are 27.4 x 11.8 x 20.7 inches.

The reason for picking the Lincoln plasma cutter is that it is the industry leader, and the internal components are made with excellent material.

The cutter’s output amperage capacity is from 10 to 40 amps, and the input voltage capacity is 208/230/1/50/60.

On the other hand, the cutter can be used on lots of thin metal plates using a wide range of power and can be used on auto body sheet and structural works.

Moreover, the output control monitor changes the cutter’s performance according to the thickness and types of materials.

Also, three years of extended warranty on this cutter include many of the necessary tools like pressure gauge, water separator, and regulator.

To make it easy to transport, the cutter, a shoulder strap is also included, and the cutter’s duty cycle is 100 percent, and the cutting capacity of the machine is ¾ inches.

Torch start system is used in this cutter instead of high-frequency no-touch Arc. Starting to avoid creating problems with high frequency starts to interfere with digital equipment and auto re-fire technology to shut down the torch when crossing gaps.

Cutter information and features
  • Lincoln Electric is the manufacturing company of the cutter
  • The weight of the cutter is 41 pounds
  • Cutter dimensions are 27.4 x 11.8 x 20.7 inches
  • Cutter model number is K2807-1
  • Installation type is plasma cutting
Pros
  • 3 years of warranty
  • The automatic Arc control system
  • Long torch cable
  • Necessary tools included with the package
Cons
  • Only single 240 input voltage cutter

9-2020 Power Plasma 62i 60 Amp CNC compatible plasma cutter

 

 

           

             Key Features

  • The material used in the cutter is metal
  • 60 percent duty cycle
  • CNC operation.

PowerPlasma 62i is the alternative of PowerPlasma 60S and uses blowback pilot Arc to cut rusted and painted metals easily.

This digital display on the plasma cutter makes it easy to use and understand what the problem cutter is facing.

If you are looking for a more robust, reliable, and accurate cutting machine, no other cutter can beat Power Plasma 62i 60 Amp.

Before launching the cutter, the manufacturing brand has tested the machine from different labs and platforms to ensure no problems while using the cutter.

If you talk about the cutter’s features, then all previous features and many new features are also included.

The cutter’s display is more extensive than other plasma cutters and the lights used are bright so instructions can be read easily.

Also, there is a color code built-in guide to set the air pressure according to the metal’s thickness without reading the instruction manual.

A sixty percent duty cycle at 60 amps makes the cutter reliable in a given price range. To make accurate cuts, automatic pressure settings are used, which change the pressure according to the application.

The gouging feature is exceptional in this plasma cutter and used digital Arc control to maintain proper cutting temperature to make precise cuts.

Lastly, the manufacturing company of the cutter gives you five years of unlimited warranty on labor and parts of the cutter.

Features and cutter information
  • Everlast Power Equipment is the manufacturer of the cutter
  • The material used in the cutter is metal
  • 60 percent duty cycle
  • CNC operation
Pros
  • Gouging feature included
  • 5 years of warranty
  • Adjustable settings like post flow timer
  • For easy Arc, start to blowback feature used
Cons

    10-PrimeWeld 50A Air Inverter Plasma Cutter

     

     

               

                 Key Features

    • The manufacturing company of the cutter is PRIMEWELD
    • The material used is metal
    • Cutter dimensions are 18 x 14 x 11 inches.

    One of the best affordable, compact, portable devices and uses non-touch Arc start systems are exceptionally designed for DIY and hobbyists.

    The handle on the cutter makes it easy to transport from one project to the other, and the display makes it easy to understand the instructions.

    On the other hand, this plasma cutter’s dual voltage capacity allows you to run the cutter directly on 110V 50/60Hz without using any switch.

    PrimeWeld 50A Air Inverter Plasma Cutter is a versatile plasma cutter that can work on lots of metals like stainless steel, mild steel, aluminum, copper, etc.

    Also, this plasma cutter’s cutting capabilities on rough and painted metals are perfect and are multiprocessing like you can use it for welding the metals and cutting and includes all the accessories with the package.

    The machine is dual voltage to use the cutter at the household outlet plugging it in a 120v power source.

    The air compressor used in the cutter needs to produce five cubic feet per minute, and the 50 amp capacity of the cutter makes it easy to cut ½ inches plate.

    Lastly, this plasma cutter’s downfall is that the instruction manual is not easy to understand, so that you may face issues.

    Features and cutter information
    • The manufacturing company of the cutter is PRIMEWELD
    • The material used is metal
    • Cutter dimensions are 18 x 14 x 11 inches
    • 25 pounds is the weight of the cutter
    • CUT50DP is the unit model number
    Pros
    • No touch Arc start
    • All tools included
    • Good warranty and customer care service
    Cons
    • Difficult instruction manual.

    Buyers guide

    Plasma cutters are a great source of making accurate and perfect cuts on the metal. Still, different cutters available with additional capacity, so need to be careful while selecting the machine and consider many of the factors like:

    Cutting type

    One of the essential factors that what type of cutting on which you are going to work. If you want to do on light steel plates, then a small and cheap cutter that can run on 120 volts is perfect for you.

    If you do massive industrial works, then look for a more massive and more powerful machine.

    Power requirements

    As you work on many metals and require different input powers, we will recommend buying a plasma cutter with dual input capacities like 120/240 volts, which can perform any work and no need to spend external money on another edge.

    Built-in air pressure

    Nowadays, many plasma cutters are available without air pressure and others with built-in air pressure, so try to spend money on edge with built-in air pressure, which is available at affordable prices and will be easy to carry to different locations.

    Warranty

    Selecting a plasma cutter with a more extended warranty will be beneficial for you. Try to choose the brand with excellent customer care services to help you immediately when facing any issue.

    Duty cycle

    The Duty cycle plays an essential role in the plasma cutter performance, so keep in mind to get the unit with a longer duty cycle.

    Frequently asked questions

    What features should you look at before buying the plasma cutter?

    According to your requirements, many factors look at, like pilot Arc, voltage capacity, duty cycle, cutting capacity, a built-in air compressor, and many more.

    You can also read our buyer’s guide to get a perfect idea.

    Which plasma cutter is perfect for the money?

    We have reviewed many of the plasma cutters. You can select anyone according to the budget, but our recommended and top pick plasma cutter is Hypertherm 088079 Powermax30 XP because of the features, performance, and other settings.

    The cutter’s price may be a little more than others, but you will get value for the money.

    Are cuts from the plasma cutter accurate?

    Yes, you can get 100 percent accurate cuts on metal by using a plasma cutter, while the other cutting metal methods are not precise, so that’s why plasma cutters are so expensive.

    Can plasma cutter cut aluminum?

    Plasma cutter does not rely on oxidation to work and can easily cut aluminum, rugged steel and copper, and many more metals efficiently and accurately.

     

     

    Final verdict

    We have select Hypertherm 088079 Powermax30 XP as the top class plasma cutter, which is an industry leader, and no other brand can beat it because features, settings, and warranty are reasonable as compared to others.

    If you are low on budget, we will recommend PrimeWeld 50A Air Inverter Plasma Cutter, available at affordable prices with unbeatable features and settings.

    Also, you can consider Everlast PowerPlasma 62i, which comes with five years of extended warranty and even a perfect machine in its class.

     

    plasma cutter

     

    you may also like the best flux core welders lets check them

    best flux core welders 2021 

    If you are low on budget then check affordable stick welders like

    best flux core welder under 200

    best flux core welder under 300